First Commit

SMD_Part_Storage_Rail.scad

@@ -0,0 +1,23 @@
+tape_width= 8;
+part_width=tape_width+4;
+part_amount=12;
+outerdiameter=66;
+boxdim=outerdiameter+10;
+boxdimhalf = boxdim/2;
+holder_thickness=part_width*part_amount+5;
+
+translate([boxdimhalf+4.5,0,0]) {
+    cube([10,boxdim+18.5,holder_thickness],center=true); //main holder part
+}
+translate([boxdimhalf-9.45,boxdimhalf-2,0]){
+    cube([7.6,10,holder_thickness],center=true); //Rear retention nose
+}
+translate([boxdimhalf-3.25,boxdimhalf-4.25,0])cube([20,6,holder_thickness],center=true);
+translate([boxdimhalf-2.8,boxdimhalf-5.8,0]) rotate([0,0,-10]) cube([20,6,holder_thickness],center=true);
+translate([boxdimhalf,boxdimhalf-8,0])rotate([0,0,30]) cube([8,15,holder_thickness],center=true);
+difference(){
+translate([boxdimhalf+4,boxdimhalf+4,0])rotate([0,0,-15]) cube([8,12,holder_thickness],center=true);
+translate([boxdimhalf+8,boxdimhalf+9.25,0])cube([15,5,holder_thickness+1],center=true);
+}
+translate([boxdimhalf-6.5,-boxdimhalf-0.75,0])rotate([0,0,30]) cube([7,15.5,holder_thickness],center=true);
+translate([boxdimhalf-1.6131,-boxdimhalf-4.7117,0]) cube([8.05,9,holder_thickness],center=true);

SMD_Part_Storage_Rail_End_Cap.scad

@@ -0,0 +1,28 @@
+
+tape_width= 8;
+part_width=tape_width+4;
+part_amount=1;
+outerdiameter=66;
+boxdim=outerdiameter+10;
+boxdimhalf = boxdim/2;
+holder_thickness=part_width*part_amount+5;
+difference(){
+    translate([5,0,-9])cube([boxdim+10,boxdim+8,5],center=true);
+    
+    scale([1.01,-1.01,1.01]){
+        translate([boxdimhalf+5,0,0])
+            cube([11,boxdim+18.5,holder_thickness],center=true); //main holder part
+        translate([boxdimhalf-9.25,boxdimhalf-2,0]){
+            cube([8,10,holder_thickness],center=true); //Rear retention nose
+        }
+        translate([boxdimhalf-3.25,boxdimhalf-4.25,0])cube([20,6,holder_thickness],center=true);
+        translate([boxdimhalf-2.8,boxdimhalf-5.8,0]) rotate([0,0,-10]) cube([20,6,holder_thickness],center=true);
+        translate([boxdimhalf,boxdimhalf-8,0])rotate([0,0,30]) cube([8,15,holder_thickness],center=true);
+        difference(){
+            translate([boxdimhalf+4,boxdimhalf+4,0])rotate([0,0,-15]) cube([8,12,holder_thickness],center=true);
+            translate([boxdimhalf+8,boxdimhalf+9.25,0])cube([15,5,holder_thickness+1],center=true);
+        }
+        translate([boxdimhalf-6.5,-boxdimhalf-0.75,0])rotate([0,0,30]) cube([7,15.5,holder_thickness],center=true);
+        translate([boxdimhalf-1.6131,-boxdimhalf-4.7117,0]) cube([8.05,9,holder_thickness],center=true);
+    }
+}

SMD_Part_storage.scad

@@ -0,0 +1,49 @@
+tape_thickness = 1.2; 
+distance_between_parts = 4;
+parts = 800; //amount of parts in 
+total_distance = parts*distance_between_parts;
+inner_diameter=16;
+tape_width= 8;
+part_width=tape_width+2.4;
+turns= 25;// https://de.planetcalc.com/9063/
+$fa = 1;
+$fs = 0.5;
+outerdiameter=72;
+boxdim=outerdiameter+10;
+boxdimhalf = boxdim/2;
+offset_insert_view=-boxdimhalf-0.001+(boxdimhalf-outerdiameter/2+tape_thickness*1.2/2);
+difference() {
+    color("grey")cube([boxdim,boxdim,part_width],center=true);
+    translate([0,0,-tape_width/2]){
+        linear_extrude(part_width-0.001){
+            circle(d=outerdiameter);
+        }
+    }
+    translate([offset_insert_view,-20,1]) cube([tape_thickness*1.2,boxdimhalf+3.001,part_width-0.4],center=true); //Tape inlet
+ translate([-boxdimhalf,-0.75*boxdimhalf,0])cube([(boxdimhalf-outerdiameter/2)*2+tape_thickness*1.2/2+0.001,10,tape_width],center=true); //viewing window
+ translate([boxdimhalf-8,-boxdimhalf+2,0])rotate([0,0,30]) cube([8,10,tape_width+4],center=true); //Retention space for front magazine clip
+    translate([boxdimhalf-3,boxdimhalf-3,0])rotate([0,0,30]) cube([8,30,tape_width+4],center=true);
+    translate([boxdimhalf+2,boxdimhalf-6,0])rotate([0,0,80]) cube([8,30,tape_width+4],center=true);
+    translate([boxdimhalf+1.5,boxdimhalf-3.3,0])cube([30,8,tape_width+4],center=true);
+}
+translate([offset_insert_view+tape_thickness*1.2*0.999,-20,0.001]) color("grey")cube([tape_thickness*1.2,boxdimhalf+3.001-17,part_width],center=true);  // Merge plate near inlet
+difference(){ //retention spring
+translate([0,boxdimhalf+2,0])color("grey") rotate([0,0,90]) cube([10,5,part_width+0.001],center=true);
+        translate([-3.85,boxdimhalf+1.5,-part_width/2-0.5])
+        linear_extrude(part_width+1){
+            circle(d=4);
+        }
+    translate([3.85,boxdimhalf+1.5,-part_width/2-0.5])
+    linear_extrude(part_width+1){
+        circle(d=4);
+    }
+}
+difference(){ //Retention Clip with Spring
+translate([0,boxdimhalf+6,0]) color("grey")cube([boxdim,6,part_width],center=true);
+translate([-boxdimhalf+10,boxdimhalf+2,0]) rotate([0,0,-8])cube([boxdimhalf,6,tape_width+3],center=true);
+translate([boxdimhalf+2.5,boxdimhalf+4,0])rotate([0,0,-15]) cube([8,20,part_width+2],center=true);
+}
+difference(){//Retention Clip with Spring
+translate([boxdimhalf,boxdimhalf+4,0]) color("grey")cube([10,10,part_width],center=true);
+translate([boxdimhalf+2.5,boxdimhalf+4,0])rotate([0,0,-15]) cube([8,20,part_width+2],center=true);
+}